One of the first things you want to do, is with home automation to lower the lights all controlled from the preset values, set the so-called scene. One problem is that you can not dim a fluorescent lamp.
The main reason is that home automation dimmer modules work giving signals by the light bulb and a fluorescent light is a load resistance, so that the fluorescent light is actually comparable to an arc flash checked that it is prevents highand fry it all digital (low voltage) is the electronics connected to it.
Some basic information on fluorescent
A fluorescent light works by heating liquid mercury, until there is a vapor and ionizing a gas (usually argon). The ballast generates an extremely high voltage to start the ionization (and once started, the voltage drops to a low level) occur.
Note: This is why the tube blinks on startup - automatically switches within the electronic tube detects whetherCurrent flows back and tried to start the process until it works.
Once started, the tube is limited to its current level of the ballast. This current depends on the design of the reactor and the AC-120 Hz frequency and characteristics of the tube - all of which are fixed.
Since the tube does not break a fluorescent tube contains mercury - mercury is poisonous (but there are only within a very small amount).
One of the reasons, the fluorescentTube is so popular is that it is very efficient, since once the arc has been created within the tube (and produces UV light), the white coating on the inside under fluorescent UV and visible light beams. This process does not generate heat so that most electricity is converted into light.
Compared to a regular bulb (incandescent lamp) is designed to operate through combustion of a metal in an inert gas, and this generates much heat and a little 'Light.
Note: A fluorescent light is about 5 times more efficient than a regular bulb (this is also the reason for a 15W fluorescent lamp to illuminate the same as a normal 60-watt incandescent bulb outputs may be for sale.
Light dimmer
Because of the way in which the pipes are working, you can not dim, but you can use an appliance module to turn them on and off. A module device has an internal relay that switches the network, regardless of the fluorescent lamp so that electronic home automationthat the sensitive electronic components are protected.
0 comments:
Post a Comment